In-depth Demand Report | Disassembling Pvc Laser Label

#module-fHeeYHLbUNDlR{text-align:center;padding-top:0vw;padding-bottom:0vw;}

#grid-BomEwLwMkEgRWLe{padding-right:0px;padding-left:0px;}
#cell-L9WfCpPyL8h0MzR{order:0;}
#unit-58Yb7VpIwDw96xE [ce-data-type="text"]{text-align:left;}

When using pressure-sensitive adhesive (PSA) materials in labels, various issues may arise during printing, application, and storage. Below are the most common problems and their corresponding solutions.


1. Printing Issues
Problems:
● Ink adhesion issues: The ink may not adhere well to the surface of the label, leading to smudging or fading.
● Slow drying time: Certain PSA materials, especially those with glossy or coated surfaces, may slow down ink drying.
● Color shift or inconsistency: Different surface coatings and ink absorption rates can lead to color variations.
Solutions:
✅ Use UV or solvent-based inks designed for PSA materials to improve adhesion and drying speed.
✅ Conduct surface treatment (e.g., corona treatment or primer coating) to enhance ink adhesion.
✅ Use color calibration techniques to maintain color consistency.


2. Adhesion and Bonding Issues
Problems:
● Poor initial tack: The label does not adhere well immediately after application.
● Label lifting or peeling: The edges of the label may lift, especially on curved surfaces or rough materials.
● Incompatibility with certain surfaces: PSA labels may not stick well to low-energy surfaces like plastic, powder-coated metals, or silicone-treated surfaces.
Solutions:
✅ Choose the correct adhesive type (e.g., permanent, removable, high-tack) based on the application surface.
✅ Increase pressure during application to improve bonding strength.
✅ Use adhesion promoters or primers for challenging surfaces.


3. Label Curling and Warping
Problems:
● Curling during application: The edges or corners of the label lift before or after application.
● Warping over time: The label may deform due to temperature or humidity changes.
Solutions:
✅ Use dimensional-stable materials that resist temperature and humidity fluctuations.
✅ Store PSA labels in a temperature-controlled and humidity-controlled environment.
✅ Ensure proper release liner tension during label dispensing to avoid excessive curling.



#cell-4kPFIz5iLP1LTFr{order:0;}

#unit-8tW3TaI63Tx4zhB{padding-top:1vw;padding-bottom:1vw;}#unit-8tW3TaI63Tx4zhB [ce-data-type="inner"]{flex-direction:column;}#unit-8tW3TaI63Tx4zhB .ce-image_inner{justify-content:center;}#unit-8tW3TaI63Tx4zhB .ce-list_items{margin:-0.8vw;margin-top:-1vw;margin-bottom:-1;padding-top:0px;padding-bottom:0px;margin-left:-1.5vw;padding-left:0px;margin-right:-1.5vw;padding-right:0px;}#unit-8tW3TaI63Tx4zhB [ce-data-type="title"]{display:none;}#unit-8tW3TaI63Tx4zhB [ce-data-type="subtitle"]{display:none;}#unit-8tW3TaI63Tx4zhB [ce-data-type="summary"]{display:none;}#unit-8tW3TaI63Tx4zhB .ce-image_item{--svg-color:rgba(202, 0, 0,1);}#unit-8tW3TaI63Tx4zhB .ce-image{--image-effect:1;border-style:solid;border-width:1px;border-color:rgba(229, 229, 229, 1);}@media(max-width:1199px){#unit-8tW3TaI63Tx4zhB .ce-list_items{margin:-1.5vw;}#unit-8tW3TaI63Tx4zhB [ce-data-type="inner"]{border-style:solid;border-width:1px;border-color:rgba(229, 229, 229, 1);}#unit-8tW3TaI63Tx4zhB .ce-image{height:100%;width:100%;--image-effect:2;}}@media(max-width:767px){#unit-8tW3TaI63Tx4zhB{padding-top:2vw;padding-bottom:2vw;}#unit-8tW3TaI63Tx4zhB .ce-list_items{margin-top:-2vw;margin-bottom:-2vw;}}












81rjAkbdvPL

















2 拷贝

















PCB-Polyimide-Masking-Tape-Adhesive-Applications 拷







#cell-8sOOH6YomUF8VUb{order:0;}
#unit-vz9lk8tm6yAhW37 [ce-data-type="text"]{text-align:left;}

4. Die-Cutting and Processing Issues
Problems:
● Labels tearing or not cutting cleanly: The adhesive may ooze out, affecting the die-cutting process.
● Release liner breakage: Thin or weak liners may break during high-speed dispensing.
● Difficulty in label dispensing: Labels may not release smoothly from the liner.
Solutions:
✅ Use die-cutting blades designed for PSA materials to ensure clean cuts.
✅ Select a proper liner material that is compatible with the label dispensing process.
✅ Store labels in a dry environment to prevent adhesive migration and liner issues.


5. Temperature and Environmental Issues
Problems:
● Label falls off in extreme temperatures: Some adhesives lose their bonding strength in hot or cold conditions.
● Adhesive failure in humid conditions: Moisture can reduce adhesion, leading to peeling or bubbling.
Solutions:
✅ Select temperature-resistant adhesives for extreme conditions (e.g., freezer-grade adhesives for cold environments).
✅ Choose moisture-resistant adhesives for humid conditions.
✅ Store labels in controlled environments before application to ensure optimal performance.


6. Surface Contamination and Compatibility Issues
Problems:
● Oil, dust, or moisture on the surface reduces adhesion.
● Adhesive reacts with certain surfaces, leading to label discoloration or residue.
Solutions:
✅ Clean the surface with alcohol or a suitable solvent before applying the label.
✅ Use low-residue adhesives if the label needs to be removed cleanly.
✅ Test the adhesive on the surface before large-scale production to ensure compatibility.


7. Regulatory and Compliance Issues
Problems:
● Food safety concerns: Labels used on food packaging must meet regulatory standards.
● Recycling and sustainability issues: Some adhesives may hinder the recyclability of packaging materials.
Solutions:
✅ Use FDA- or EU-compliant adhesives for food packaging applications.
✅ Choose eco-friendly, recyclable, or biodegradable PSA materials to meet sustainability goals.



#cell-9qISZDMpBQzpumV{padding-top:1vw;padding-bottom:1vw;order:0;}@media(max-width:767px){#cell-9qISZDMpBQzpumV{padding-top:2vw;padding-bottom:2vw;}}

#unit-oxL5zzmp4gCkBTx .ce-image_item{--svg-color:rgba(202, 0, 0,1);}#unit-oxL5zzmp4gCkBTx .ce-image{--image-effect:1;border-style:solid;border-width:1px;border-color:rgba(229, 229, 229, 1);}@media(max-width:1199px){#unit-oxL5zzmp4gCkBTx .ce-image{height:100%;width:100%;--image-effect:2;}}









#cell-lp7U5J9RqHfdRUy{padding-top:1vw;order:0;}@media(max-width:767px){#cell-lp7U5J9RqHfdRUy{padding-top:2vw;}}


#unit-iROL62z3nvyJPMD [ce-data-type="text"]{text-align:left;}

Summary Table

#unit-2GUIofS4mPWcxZc{padding-top:1vw;}@media(max-width:767px){#unit-2GUIofS4mPWcxZc{padding-top:3vw;}}





Issue Category



Specific Problems



Solutions





Printing Issues



Ink adhesion, slow drying, color shift



Use proper inks, surface treatment, and color calibration





Adhesion Issues



Poor initial tack, peeling, surface incompatibility



Select suitable adhesives, apply more pressure, use adhesion promoters





Curling Issues



Labels curling or warping



Use stable materials, control storage conditions, adjust release liner tension





Die-Cutting Issues



Labels tearing, liner breakage, dispensing issues



Use proper die-cutting blades, select appropriate liner materials





Environmental Issues



Adhesive failure in extreme temperatures or humidity



Use temperature- and moisture-resistant adhesives





Surface Issues



Contaminants affecting adhesion, residue problems



Clean surfaces before application, test adhesive compatibility





Regulatory Issues



Food safety concerns, recycling issues



Use compliant adhesives, opt for eco-friendly materials






#unit-Xof99Jm8rQPP2hw{padding-top:1vw;}#unit-Xof99Jm8rQPP2hw [ce-data-type="text"]{text-align:left;}

Offering a variety of specialized PSA materials—such as high-tack adhesives for rough surfaces, removable adhesives for temporary applications, and freezer-grade adhesives—can help increase product competitiveness and meet specific market demands.

#module-fHeeYHLbUNDlR{text-align:center;padding-top:0vw;padding-bottom:0vw;}

#grid-BomEwLwMkEgRWLe{padding-right:0px;padding-left:0px;}
#cell-L9WfCpPyL8h0MzR{order:0;}
#unit-58Yb7VpIwDw96xE [ce-data-type="text"]{text-align:left;}

1. Printing Issues
Problems:
● Poor ink absorption, leading to slow drying and smudging.
● Uneven color distribution and blurry images.
● Poor ink adhesion, especially with UV printing.
Solutions:
✅ Use fast-drying inks or UV-curable inks and adjust printing pressure accordingly.
✅ Opt for low-viscosity inks to improve print uniformity.
✅ Perform surface treatments such as corona treatment or priming to enhance ink adhesion.


2. Die-Cutting and Waste Removal Issues
Problems:
● Cast coated paper is brittle, making it prone to cracking or chipping during die-cutting.
● Difficult waste removal, reducing production efficiency.
● Uneven cutting edges, leading to labels peeling off or rough edges.
Solutions:
✅ Use sharp die-cutting blades to improve precision and minimize edge cracking.
✅ Adjust die-cutting pressure to prevent paper breakage.
✅ Modify the waste removal process by widening waste edges or optimizing the cutting layout.


3. Adhesion Problems
Problems:
● The glossy surface makes it difficult for adhesives to bond properly.
● Labels may curl or lose adhesion over time.
● Adhesive performance weakens in cold or humid environments.
Solutions:
✅ Choose high-tack adhesives specifically designed for cast coated paper.
✅ Ensure labels are fully dry before storage to prevent adhesive degradation.


✅ Use suitable release liners (e.g., glassine or PET) to prevent curling.



#cell-4kPFIz5iLP1LTFr{order:0;}

#unit-8tW3TaI63Tx4zhB{padding-top:1vw;padding-bottom:1vw;}#unit-8tW3TaI63Tx4zhB [ce-data-type="inner"]{flex-direction:column;}#unit-8tW3TaI63Tx4zhB .ce-image_inner{justify-content:center;}#unit-8tW3TaI63Tx4zhB .ce-list_items{margin:-0.8vw;margin-top:-1vw;margin-bottom:-1;padding-top:0px;padding-bottom:0px;margin-left:-1.5vw;padding-left:0px;margin-right:-1.5vw;padding-right:0px;}#unit-8tW3TaI63Tx4zhB [ce-data-type="title"]{display:none;}#unit-8tW3TaI63Tx4zhB [ce-data-type="subtitle"]{display:none;}#unit-8tW3TaI63Tx4zhB [ce-data-type="summary"]{display:none;}#unit-8tW3TaI63Tx4zhB .ce-image_item{--svg-color:rgba(202, 0, 0,1);}#unit-8tW3TaI63Tx4zhB .ce-image{--image-effect:1;border-style:solid;border-width:1px;border-color:rgba(229, 229, 229, 1);}@media(max-width:1199px){#unit-8tW3TaI63Tx4zhB .ce-list_items{margin:-1.5vw;}#unit-8tW3TaI63Tx4zhB [ce-data-type="inner"]{border-style:solid;border-width:1px;border-color:rgba(229, 229, 229, 1);}#unit-8tW3TaI63Tx4zhB .ce-image{height:100%;width:100%;--image-effect:2;}}@media(max-width:767px){#unit-8tW3TaI63Tx4zhB{padding-top:2vw;padding-bottom:2vw;}#unit-8tW3TaI63Tx4zhB .ce-list_items{margin-top:-2vw;margin-bottom:-2vw;}}












WechatIMG1313 拷贝 (2)

















WechatIMG1314 拷贝

















WechatIMG1315 拷贝







#cell-8sOOH6YomUF8VUb{order:0;}
#unit-vz9lk8tm6yAhW37 [ce-data-type="text"]{text-align:left;}

4. Water and Abrasion Resistance
Problems:
● Exposure to moisture can cause bubbling or coating detachment.
● Labels are prone to scratching or wear over time.
Solutions:
✅ Select waterproof cast coated paper or apply an additional water-resistant coating.
✅ Use scratch-resistant coatings or lamination to enhance durability.
✅ Apply UV varnish for extra abrasion resistance.


5. Warping Due to Temperature and Humidity Changes
Problems:
● Paper deforms when exposed to moisture, affecting label application.
● High temperatures can soften the coating, reducing adhesion quality.
Solutions:
✅ Store in a controlled environment (recommended: 20-25°C, 40-60% humidity).
✅ Avoid prolonged exposure to heat or humidity during transport.
✅ Use thicker or composite materials for better stability.


6. Environmental and Regulatory Compliance
Problems:
● Some coatings may not comply with environmental regulations, affecting exports.
● Cast coated paper is less recyclable, increasing sustainability concerns.
Solutions:
✅ Choose materials that meet ROHS, REACH, or other regulatory requirements.
✅ Use eco-friendly water-based coatings to minimize chemical impact.
✅ Opt for recyclable or biodegradable label materials to align with sustainability goals.



#cell-tGF8TZpMhc1io1N{order:0;}

#unit-o0fGXahr3dWFUlL{padding-top:1vw;padding-bottom:1vw;}#unit-o0fGXahr3dWFUlL [ce-data-type="inner"]{flex-direction:column;}#unit-o0fGXahr3dWFUlL .ce-image_inner{justify-content:center;}#unit-o0fGXahr3dWFUlL .ce-list_items{margin:-0.8vw;margin-top:-1vw;margin-bottom:-1;padding-top:0px;padding-bottom:0px;margin-left:-1.5vw;padding-left:0px;margin-right:-1.5vw;padding-right:0px;}#unit-o0fGXahr3dWFUlL [ce-data-type="title"]{display:none;}#unit-o0fGXahr3dWFUlL [ce-data-type="subtitle"]{display:none;}#unit-o0fGXahr3dWFUlL [ce-data-type="summary"]{display:none;}#unit-o0fGXahr3dWFUlL .ce-image_item{--svg-color:rgba(202, 0, 0,1);}#unit-o0fGXahr3dWFUlL .ce-image{--image-effect:1;border-style:solid;border-width:1px;border-color:rgba(229, 229, 229, 1);}@media(max-width:1199px){#unit-o0fGXahr3dWFUlL .ce-list_items{margin:-1.5vw;}#unit-o0fGXahr3dWFUlL [ce-data-type="inner"]{border-style:solid;border-width:1px;border-color:rgba(229, 229, 229, 1);}#unit-o0fGXahr3dWFUlL .ce-image{height:100%;width:100%;--image-effect:2;}}@media(max-width:767px){#unit-o0fGXahr3dWFUlL{padding-top:2vw;padding-bottom:2vw;}#unit-o0fGXahr3dWFUlL .ce-list_items{margin-top:-2vw;margin-bottom:-2vw;}}












图片3 拷贝

















21(1) 拷贝







#cell-b48aNegxpCmQkAI{padding-top:1vw;order:0;}@media(max-width:767px){#cell-b48aNegxpCmQkAI{padding-top:2vw;}}


#unit-WIOs9Alr26v6tVX [ce-data-type="text"]{text-align:left;}

Conclusion

#unit-8r1rRDsNnPwh8pu{padding-top:1vw;}#unit-8r1rRDsNnPwh8pu [ce-data-type="text"]{text-align:left;}

Cast coated paper is widely used in the labeling industry but presents challenges such as printability, die-cutting, adhesion, and durability. By optimizing ink selection, adjusting cutting processes, improving adhesives, and enhancing resistance properties, its performance can be significantly improved. If your company faces specific issues during the printing process, feel free to provide more details, and I can help you find tailored solutions!

#module-fHeeYHLbUNDlR{text-align:center;padding-top:0vw;padding-bottom:0vw;}

#grid-BomEwLwMkEgRWLe{padding-right:0px;padding-left:0px;}
#cell-L9WfCpPyL8h0MzR{order:0;}
#unit-58Yb7VpIwDw96xE [ce-data-type="text"]{text-align:left;}

Issue 1: Uneven Shrinking or Wrinkles

● Cause: Improper heat distribution in the shrink tunnel or incorrect shrink film selection.

✅ Solution: Adjust the heat settings, optimize airflow, and use the correct film type based on shrink percentage requirements.

Issue 2: Film Peeling Off After Application
● Cause: Poor adhesive selection or excessive humidity during storage.
✅ Solution: Use a suitable adhesive and store the shrink films in a controlled environment to prevent moisture-related issues.

Issue 3: Ink Smudging or Poor Print Quality
● Cause: Incompatible printing inks or incorrect drying temperature.
✅ Solution: Choose high-quality printing inks compatible with PETG or PVC and optimize drying temperature settings.

Issue 4: Shrink Film Cracking or Brittleness
● Cause: Low-quality material or extreme cold storage conditions.
✅ Solution: Use high-grade PETG films for better flexibility and store materials at recommended temperatures.



#cell-4kPFIz5iLP1LTFr{order:0;}

#unit-8tW3TaI63Tx4zhB{padding-top:1vw;padding-bottom:0vw;}#unit-8tW3TaI63Tx4zhB [ce-data-type="inner"]{flex-direction:column;}#unit-8tW3TaI63Tx4zhB .ce-image_inner{justify-content:center;}#unit-8tW3TaI63Tx4zhB .ce-list_items{margin:-0.8vw;margin-top:-1vw;margin-bottom:0vw;padding-top:0px;padding-bottom:0px;margin-left:-1.5vw;padding-left:0px;margin-right:-1.5vw;padding-right:0px;}#unit-8tW3TaI63Tx4zhB [ce-data-type="title"]{display:none;}#unit-8tW3TaI63Tx4zhB [ce-data-type="subtitle"]{display:none;}#unit-8tW3TaI63Tx4zhB [ce-data-type="summary"]{display:none;}#unit-8tW3TaI63Tx4zhB .ce-image_item{--svg-color:rgba(202, 0, 0,1);}#unit-8tW3TaI63Tx4zhB .ce-image{--image-effect:1;border-style:solid;border-width:1px;border-color:rgba(229, 229, 229, 1);}@media(max-width:1199px){#unit-8tW3TaI63Tx4zhB .ce-list_items{margin:-1.5vw;margin-bottom:-1;}#unit-8tW3TaI63Tx4zhB [ce-data-type="inner"]{border-style:solid;border-width:1px;border-color:rgba(229, 229, 229, 1);}#unit-8tW3TaI63Tx4zhB .ce-image{height:100%;width:100%;--image-effect:2;}}@media(max-width:767px){#unit-8tW3TaI63Tx4zhB{padding-top:2vw;}#unit-8tW3TaI63Tx4zhB .ce-list_items{margin-top:-2vw;margin-bottom:0vw;}}












A high-quality close-up image of a PETG transparen

















A high-quality, ultra-realistic image of a PETG tr (2)

















- An ultra-realistic image of a large water jug wi

#module-fHeeYHLbUNDlR{text-align:center;padding-top:0vw;padding-bottom:0vw;}

#grid-BomEwLwMkEgRWLe{padding-right:0px;padding-left:0px;}
#cell-L9WfCpPyL8h0MzR{order:0;}
#unit-58Yb7VpIwDw96xE [ce-data-type="text"]{text-align:left;}

When using metallized paper for label production, several common issues may arise. Below is a list of potential problems and corresponding solutions:


1. Printing Issues
Problems:
● Poor ink adhesion: The smooth metallized surface makes it difficult for regular inks to adhere, leading to ink peeling or blurring.
● Slow drying speed: The metallized layer reduces ink absorption and evaporation, causing longer drying times and lower production efficiency.
● Low color reproduction accuracy: The reflective nature of the metallized surface can affect color presentation, leading to deviations in print color.
Solutions:
✅ Use specialized inks (such as UV or water-based inks) to improve adhesion and drying speed.
✅ Apply corona treatment or pre-coating to increase surface energy and improve ink adhesion.
✅ Use a white base layer or adjust color management settings to compensate for the reflective effect.


2. Coating and Surface Treatment Issues
Problems:
● Poor adhesion of UV varnish or lamination: The low surface energy of the metallized paper may cause coatings or varnish layers to peel off.
● Low surface tension: This can affect ink, coating, and adhesive performance, leading to poor processing results.
Solutions:
✅ Use corona treatment or pre-coating layers to increase surface energy, improving the adhesion of UV varnish, lamination, or top coatings.
✅ Choose specially formulated UV varnish or water-based coatings designed for metallized paper.
✅ Store the paper in a dry environment to prevent moisture from affecting the metallized layer.


3. Die-cutting and Processing Issues
Problems:
● Edge cracking or aluminum layer peeling: The metallized layer may detach during die-cutting, affecting the label’s appearance.
● Aluminum layer separation after cutting: The metallized coating may peel off when the label is bent or folded, reducing product quality.
Solutions:
✅ Use high-quality die-cutting blades and optimize pressure settings to prevent cracking or peeling.
✅ Choose flexible metallized paper to enhance adhesion and resistance to folding.
✅ Adjust the die-cutting angle to minimize direct impact on the metallized layer, reducing peeling risks.



#cell-4kPFIz5iLP1LTFr{order:0;}

#unit-8tW3TaI63Tx4zhB{padding-top:1vw;padding-bottom:1vw;}#unit-8tW3TaI63Tx4zhB [ce-data-type="inner"]{flex-direction:column;}#unit-8tW3TaI63Tx4zhB .ce-list_items{margin:-0.8vw;margin-top:-1vw;margin-bottom:-1;padding-top:0px;padding-bottom:0px;margin-left:-1.5vw;padding-left:0px;margin-right:-1.5vw;padding-right:0px;}#unit-8tW3TaI63Tx4zhB [ce-data-type="title"]{display:none;}#unit-8tW3TaI63Tx4zhB [ce-data-type="subtitle"]{display:none;}#unit-8tW3TaI63Tx4zhB [ce-data-type="summary"]{display:none;}#unit-8tW3TaI63Tx4zhB .ce-image_item{--svg-color:rgba(202, 0, 0,1);}#unit-8tW3TaI63Tx4zhB .ce-image{--image-effect:1;border-style:solid;border-width:1px;border-color:rgba(229, 229, 229, 1);}@media(max-width:1199px){#unit-8tW3TaI63Tx4zhB .ce-list_items{margin:-1.5vw;}#unit-8tW3TaI63Tx4zhB [ce-data-type="inner"]{border-style:solid;border-width:1px;border-color:rgba(229, 229, 229, 1);}#unit-8tW3TaI63Tx4zhB .ce-image{height:100%;width:100%;--image-effect:2;}}@media(max-width:767px){#unit-8tW3TaI63Tx4zhB{padding-top:2vw;padding-bottom:2vw;}#unit-8tW3TaI63Tx4zhB .ce-list_items{margin-top:-2vw;margin-bottom:-2vw;}}












WechatIMG1306 拷贝

















WechatIMG1308 拷贝







#cell-qtfuH8uUR3xzsdI{order:0;}
#unit-QTF6unmKOR84sjv [ce-data-type="text"]{text-align:left;}

4. Adhesion Issues
Problems:
● Weak adhesive bonding: The metallized layer can interfere with glue adhesion, making labels difficult to stick.
● Bubbles or detachment: Adhesives may form bubbles or fail in high humidity or high-temperature environments.
Solutions:
✅ Use adhesives specifically designed for metallized surfaces, such as high-adhesion solvent-based adhesives.
✅ Apply a primer or coating layer to enhance the adhesive’s bonding ability.
✅ Control humidity levels to prevent moisture absorption, which could impact adhesion performance.


5. Durability and Storage Issues
Problems:
● Moisture absorption and warping: Metallized paper has higher moisture sensitivity, leading to deformation when improperly stored.
● Poor heat resistance: High temperatures may cause oxidation or discoloration of the metallized layer.
Solutions:
✅ Store in a dry and temperature-controlled environment (recommended humidity < 50%, temperature 20-25°C).
✅ Use moisture-proof packaging to prevent humidity damage during storage and transportation.
✅ Avoid direct sunlight and high temperatures to prevent oxidation or discoloration of the metallized layer.


6. Environmental and Regulatory Issues
Problems:
● Difficult to recycle: Some metallized papers are harder to recycle due to the presence of the aluminum layer.
● Food safety concerns: Some metallized coatings may not comply with food packaging regulations.
Solutions:
✅ Choose eco-friendly and recyclable metallized paper, such as water-based coated metallized paper.
✅ Ensure compliance with FDA, EU, and other food safety standards, especially for food packaging labels.
✅ Reduce the use of solvent-based chemicals in production and adopt environmentally friendly coating technologies to lower pollution risks.



#cell-dL7RQbAU8c5h1Lv{order:0;}

#unit-wmBYNAmTlSIegDV{padding-top:1vw;padding-bottom:1vw;}#unit-wmBYNAmTlSIegDV [ce-data-type="inner"]{flex-direction:column;}#unit-wmBYNAmTlSIegDV .ce-list_items{margin:-0.8vw;margin-top:-1vw;margin-bottom:-1;padding-top:0px;padding-bottom:0px;margin-left:-1.5vw;padding-left:0px;margin-right:-1.5vw;padding-right:0px;}#unit-wmBYNAmTlSIegDV [ce-data-type="title"]{display:none;}#unit-wmBYNAmTlSIegDV [ce-data-type="subtitle"]{display:none;}#unit-wmBYNAmTlSIegDV [ce-data-type="summary"]{display:none;}#unit-wmBYNAmTlSIegDV .ce-image_item{--svg-color:rgba(202, 0, 0,1);}#unit-wmBYNAmTlSIegDV .ce-image{--image-effect:1;border-style:solid;border-width:1px;border-color:rgba(229, 229, 229, 1);}@media(max-width:1199px){#unit-wmBYNAmTlSIegDV .ce-list_items{margin:-1.5vw;}#unit-wmBYNAmTlSIegDV [ce-data-type="inner"]{border-style:solid;border-width:1px;border-color:rgba(229, 229, 229, 1);}#unit-wmBYNAmTlSIegDV .ce-image{height:100%;width:100%;--image-effect:2;}}@media(max-width:767px){#unit-wmBYNAmTlSIegDV{padding-top:2vw;padding-bottom:2vw;}#unit-wmBYNAmTlSIegDV .ce-list_items{margin-top:-2vw;margin-bottom:-2vw;}}












WechatIMG1305 拷贝

















WechatIMG1307 拷贝







#cell-8sOOH6YomUF8VUb{order:0;}
#unit-vz9lk8tm6yAhW37 [ce-data-type="text"]{text-align:left;}#unit-vz9lk8tm6yAhW37{padding-top:0.5vw;}

Summary Table




#cell-NJ0lsnBS3huhR2U{order:0;}


#unit-2V2x0gL8ouL2m26{padding-top:1vw;}@media(max-width:767px){#unit-2V2x0gL8ouL2m26{padding-top:2vw;}}





Issue Category



Specific Problems



Solutions





Printing Issues



Poor ink adhesion, slow drying, color inaccuracy



Use specialized inks, pre-treatment, and white base layers





Coating Issues



Poor varnish or lamination adhesion



Increase surface tension with corona treatment, use proper coatings





Die-cutting Issues



Edge cracking, peeling, aluminum layer detachment



Optimize cutting pressure, use flexible metallized paper





Adhesion Issues



Weak bonding, bubbling, label detachment



Use high-adhesion adhesives, improve surface treatment





Durability Issues



Moisture warping, heat sensitivity



Store in dry conditions, use moisture-proof packaging





Environmental Issues



Recycling difficulties, food safety concerns



Use recyclable materials, meet safety standards






#cell-b48aNegxpCmQkAI{padding-top:1vw;order:0;}@media(max-width:767px){#cell-b48aNegxpCmQkAI{padding-top:2vw;}}


#unit-WIOs9Alr26v6tVX [ce-data-type="text"]{text-align:left;}

🔹 If your customers are printing companies or label manufacturers, consider offering customized metallized paper solutions based on different applications, such as:

#unit-8r1rRDsNnPwh8pu{padding-top:1vw;}#unit-8r1rRDsNnPwh8pu [ce-data-type="text"]{text-align:left;}

● High-adhesion metallized paper for UV printing
● Heat-resistant